E-100 Tank Destroyer - A Postwar German “What-If” Concept

The E-100 Tank Destroyer represents a speculative post-war evolution of Germany’s late-war heavy armor concepts. Based on the E-series chassis, this build depicts a vehicle envisioned shortly after 1945, incorporating late-production features and experimental modifications that were being explored as the war drew to a close.

This 1/35 scale model is Trumpeter’s E-100 Tank Destroyer and features a newly installed black lacquer barrel along with an added aerial protection plate for the crew. More than fifteen modifications and refinements were made during the build, including hull surface texturing, drilled-out machine gun barrel, an empty fire extinguisher bracket, airbrushed stencils, detailed sighting optics, and a fully equipped front spare track holder with mounted tracks.

Weathering was kept controlled to reflect a vehicle in limited service or evaluation rather than prolonged combat use. The overall finish balances realism with a clean, late-production appearance, emphasizing the imposing size and presence of the E-100 design while remaining grounded in plausible late-war German engineering practices.

Me 262 A-1a - The World’s First Operational Jet Fighter

The Messerschmitt Me 262 A-1a was the world’s first operational jet-powered fighter and one of the most revolutionary combat aircraft of World War II. Entering service late in the conflict, it offered a dramatic leap in speed and firepower that rendered contemporary Allied fighters largely incapable of intercepting it under the right conditions. Despite its technological superiority, chronic fuel shortages, maintenance challenges, and Allied air superiority limited its overall impact.

This 1/48 scale model is Tamiya’s Me 262 A-1a, depicted as it might have appeared toward the end of the war. The aircraft is finished to represent a machine undergoing ongoing maintenance, with replacement forward fuselage panels installed but not yet repainted prior to returning to service. This results in a visibly mixed finish that reflects the increasingly desperate and improvised conditions of late-war Luftwaffe operations.

The model was completed using acrylic paints and Alclad II for the natural metal sections, with restrained weathering to emphasize operational wear without overwhelming the aircraft’s distinctive lines. The contrast between camouflage and exposed metal panels highlights both the advanced nature of the Me 262 and the realities of wartime attrition and repair.

McLaren MP4/6 - Honda V12 Power and a Championship Legend

The McLaren MP4/6 represents one of the most successful and technically refined Formula One cars of the early 1990s. Powered by Honda’s naturally aspirated V12 engine, the MP4/6 delivered a rare combination of raw power, smooth drivability, and mechanical reliability. The car competed during the 1991 Formula One season and carried Ayrton Senna to his third World Championship, securing McLaren’s place at the peak of the sport during the final years of the V12 era.

This example is Tamiya’s 1/12 scale McLaren MP4/6, built largely out of the box using Tamiya paints throughout. Minor additions were made to the engine bay, including select electrical wiring, to enhance realism while preserving the clean, mechanical presentation of the kit. The Honda V12 remains the focal point of the build, showcasing the dense packaging and intricate engineering that defined Formula One at the time.

The main bodywork was intentionally left removable and displayed off the car. Due to the tight tolerances of the kit, repeated installation risked damaging the finish on the suspension struts despite careful priming. More importantly, leaving the body panels off allows full visibility of nearly all of the car’s mechanical detail, revealing the craftsmanship and complexity that is often hidden once the body is installed.

Panther Ausf. F - A Prototype for the Darkness

The Panther Ausf. F (Sd.Kfz. 171) represents one of Germany’s late-war attempts to regain battlefield advantage through technology rather than numbers. Developed during the final months of World War II, the Ausf. F incorporated plans for an improved Schmalturm turret and experimental infrared night-fighting equipment intended to allow armored units to operate effectively after dark.

This particular vehicle never saw combat. It was discovered by Allied forces while still undergoing night-fighting trials, equipped with infrared vision devices, subdued markings, and finished in a solid off-black scheme intended to reduce visibility under low-light conditions. With the collapse of Germany’s industrial and logistical infrastructure, the program was abandoned before it could be fielded operationally.

The weathering on this model reflects a vehicle left unused and exposed after the war—rust staining, accumulated dust, and rain streaking dominate the finish. Following its capture, the Panther was reportedly used for Allied ballistic testing before ultimately being scrapped, bringing an end to one of Germany’s more ambitious late-war armored concepts.

This build focuses on atmosphere and narrative as much as accuracy, portraying the Panther Ausf. F not as a frontline combat vehicle, but as a technological dead end - an advanced machine overtaken by events before it could prove itself.

O-I - The Imperial Japanese Army’s Super-Heavy That Never Was

The O-I super-heavy tank represents one of Imperial Japan’s most ambitious armored concepts of the Second World War. Planned as a massive breakthrough vehicle weighing an estimated 150 tons, the O-I was intended to dominate fortified positions and counter increasingly heavy Allied armor. In reality, Japan’s limited industrial capacity, material shortages, and the changing nature of the war prevented the design from ever progressing beyond the planning and prototype stage.

This model is based on the Takom kit and was approached as a blank slate due to the speculative nature of the subject. Several modifications were added to enhance realism and narrative, including additional front plate armor, a rear crew telephone, a front track holder, and a replacement left-side skirt panel depicted in partially rusted primer, suggesting prolonged exposure to tropical operating conditions.

Weathering became the primary focus of the build, reflecting a vehicle that might have existed in limited trials or limited active service. Each rivet was individually hand-shaded to emphasize the tank’s massive construction, and the headlight lenses were scratch-built from resin. The finish combines heavy wear, grime, and subtle corrosion to convey the sheer scale and impracticality of the design.

The O-I remains a fascinating example of wartime ambition outpacing reality - a super-heavy tank conceived during a period when Japan no longer possessed the resources to bring such an idea to life.

 

The Char B1 - Powerful, Complex, and Overtaken by Events

The French Char B1 was one of the most heavily armed and armored tanks in service at the outbreak of World War II. Designed as a breakthrough tank, it combined thick armor with a unique dual-gun layout: a hull-mounted 75mm gun for bunker busting and a turret-mounted 47mm anti-tank gun. On paper, the Char B1 was more than capable of defeating contemporary German armor and often proved nearly impervious to early Panzer weapons.

In practice, the tank’s complexity worked against it. Limited range, high fuel consumption, one-man turret workload, and poor tactical coordination reduced its effectiveness during the 1940 campaign. Despite these shortcomings, individual Char B1 crews achieved remarkable success, with several documented engagements where single tanks knocked out multiple enemy vehicles before being disabled or abandoned.

This 1/35 scale Tamiya Char B1 was finished using acrylics and oil paints, with weathering kept grounded and realistic to reflect a vehicle operating during the opening phase of the war. Subtle wear, accumulated dirt, and restrained chipping were applied to emphasize the tank’s heavy construction without overstating battlefield damage. The build focuses on form and mass, highlighting the Char B1’s distinctive shape and imposing presence.

The Char B1 remains a fascinating example of a technically impressive tank whose design philosophy was overtaken by the realities of modern, fast-moving armored warfare.

German E-100 - Exploring the Krupp Center Turret Concept

The German E-100 super-heavy tank fitted with a Krupp-designed center-mounted turret represents one of several late-war and postwar conceptual directions explored for Germany’s E-series heavy armor program. While the E-100 chassis itself progressed to limited construction, turret configurations varied widely on paper, with centralized turret layouts proposed to simplify production and improve weight distribution.

This 1/35 scale model depicts a “what-if” interpretation of the E-100 using a center-mounted Krupp turret. The build incorporates scratch-built infrared equipment on the turret roof along with a remote-controlled Goliath tracked mine carried on a cradle and winch assembly. Weathering was completed using acrylics, oil washes, clay-based washes, and selective pigment work to convey a vehicle that saw active combat.

WW2 Italian Lancia Armored Car Balkans 1943

The Lancia armored car served the Italian Army primarily in secondary theaters such as the Balkans, where terrain, climate, and anti-partisan operations shaped both its use and appearance. By 1943, many Italian vehicles operating in the region carried locally applied camouflage patterns intended to break up their outlines in rocky, arid landscapes rather than formal parade-ground finishes.

This model is finished in acrylics with light oil washes to reflect a relatively dry operating environment. Weathering is restrained, focusing on dust accumulation and subtle wear rather than heavy combat damage, consistent with a vehicle used for patrol and security duties rather than frontline armored combat.